Motor control MST 102
Allows the 3 point controller MST 101 to be operated with a stepper motor as actuator.
- For bipolar step motors up to 2A phase current
- Phase current monitoring adjustable (chopper)
- Two speeds selectable (Jumper)
Connection Diagram MST 102
The phase current is set at the setting resistor (top). After removal of the terminal cover (bottom left) the jumper is accessible for changing the speeds.
Orbital period:
- Jumper open; 12 sec / revolution
- Jumper set; 6 sec / revolution
- Further speeds are possible by arrangement
General Technical Data MST 102
|
Operation voltage |
230 V AC ±10% ; 50 Hz |
|
Fuse internally |
500 mA, träge |
|
Energize |
max. 25 VA |
|
Output voltage with internal power supply |
12 V DC |
|
Output voltage with external power supply |
max. 24 V DC |
|
Phase current per phase with external power supply |
max. 2A per Phase |
|
Connection |
max. 1,5 mm² |
|
Mass |
ca. 820 g |
|
Protection degree |
IP20 |
|
Ambient temperature |
+5°C bis + 40°C |
|
Storage temperature |
+5 °C bis +80 °C |
|
Dimension housing for top-hat rail montage (BxHxT) |
(160x90x60) mm |
|
Install |
DIN-top-hat rail |
|
Approbation |
CE, EN61000-6-3, EN61010-1 |